Xthetic® temp office
Chairside Crown and Bridge Resin, AutopolymerAcrylic resin for the direct, intraoral fabrication of temporary crowns and bridges in the dental practice.
Indications
- temporary crowns and bridges (long-term use, direct intraoral application)
Product features
- easy processing
- excellent mechanical properties
- easy finishing and polishing
- physiological, fluorescent shades and absolute color stability
- Cadmium free
- evaluated and certified biocompatibility
Product details
Mixing ratio:
10g of powder with 5g of liquid
Processing times:
Swelling phase: approx. 40 sec
Pouring phase: approx. 1 min
Plastic phase: approx. 3 min
Polymerization:
Polymerization sets in automatically at room temperature after approx. 8-12 min.
Shades:
The material is available in light, medium and dark.
Delivery forms:
Powder: 100g
Liquid: 100ml
Note:
Medical Device. Classification according to ISO 10477, Type 1 and according to MDD 93/42/EEC Annex IX, Class IIa for removable and for fixed dentures.
Technical data
| mechanical properties acc. to ISO 10477 | Requirements | Xthetic® temp office |
| Ultimate flexural strength in MPa | min. 50 | 73 |
| Bond strength in MPa | min. 5 | 19 |
| additional properties acc. to ISO 10477 | Requirements | Xthetic® temp office |
| Water absorption in μg/mm³ | max. 40 | 21 |
| Solubility in μg/mm³ | max. 7,5 | 1,9 |
| other requirements | Xthetic® temp office |
| ISO 10477 Requirements concerning the ambient light sensitivity | not required |
| ISO 10477 Requirements concerning the depth of cure | not required |
| ISO 10477 Requirements concerning the surface finish | not required |
| ISO 10477 Requirements concerning the shade consistency | not required |
| ISO 10477 Requirements concerning the color stability | not required |
| ISO 10993 Requirements concerning the biocompatibility | fulfilled |